![]() |
If you have built a new house or need a separate meter for your apartment, this guide explains the requirements, estimated costs and steps to follow.
How Much Does an ECG Meter Cost in Ghana?
The cost depends on your property's existing electricity connection and the type of service you need. The following figures can help you plan your budget.
| Item or service | Estimated cost |
|---|---|
| ECG application form | GH₵100 |
| Meter where a suitable connection already exists | GH₵900 |
| Standard service | GH₵1,366 |
| Express service | GH₵2,236.50 |
| Premium service | GH₵3,386.50 |
| Electrical inspection | GH₵50–GH₵250 for specified property types |
Note: The Standard, Express and Premium figures were reported by The Fourth Estate in November 2025. They are estimates, not confirmed current ECG prices. The application fee and GH₵900 meter cost are based on reported amounts and should also be confirmed with ECG.
Your final cost may be higher if the property needs new electrical wiring, additional poles or an extension of the electricity network. Always request an official quotation before paying.
What Do You Need to Apply for an ECG Meter?
Before applying, prepare the necessary documents and make sure your electrical installation is ready.
1. Site Plan
You may need a site plan showing the location of your property when applying for a new electricity connection. It helps ECG identify the property and assess the connection requirements. Confirm the exact documents required for your application with ECG.
2. Valid Identification
Prepare an accepted form of identification and your contact details. If you are applying for a separate meter in a compound house, ECG may request additional documents relating to the existing connection or your occupancy.
3. Completed Electrical Wiring
Your house must have properly completed electrical wiring. A qualified electrical professional should carry out the work and ensure that the installation meets the required safety standards.
4. Electrical Inspection and Certification
The electrical installation must meet the applicable safety requirements. You may need an installation completion certificate and the relevant inspection and certification before the connection can proceed.
The Energy Commission publishes the following maximum inspection and testing charges for specified installation categories:
| Property type | Inspection charge |
|---|---|
| Single room, kiosk or store | GH₵50 |
| Two-bedroom apartment | GH₵100 |
| Three-bedroom apartment | GH₵150 |
| Four-bedroom apartment | GH₵200 |
| Five-bedroom apartment | GH₵250 |
These figures are based on the Energy Commission's published inspection and testing charges. Additional circuits may attract extra charges. The inspection fee is separate from the cost of completing your electrical wiring.
How to Apply for an ECG Meter
Step 1: Visit an ECG Office
Explain that you need a new electricity meter or a separate meter for your property. ECG will guide you on the application process and the documents required.
Step 2: Complete the Application
Obtain and complete the appropriate application form. Submit the required documents and confirm the current application fee before paying.
Step 3: Complete Your Electrical Wiring
If your house is newly built, ensure that the wiring is completed by a qualified electrical professional. Obtain the necessary completion documents before proceeding with the required inspection.
Step 4: Arrange the Required Inspection
Follow the applicable inspection and certification process. If any electrical problems are identified, they must be corrected before the installation can be approved.
Step 5: Allow ECG to Assess Your Property
ECG will assess your connection requirements and determine the applicable charges. If additional poles or an extension of the electricity network are needed, the cost may increase.
Step 6: Pay Through Official Cashless Channels
ECG uses cashless payment channels for its official transactions. Make payments through an authorised channel and keep your receipt or transaction confirmation.
Avoid handing cash to individuals who promise to secure a meter for you. If you are unsure whether a payment request is legitimate, verify it directly with ECG before proceeding.
Step 7: Wait for Installation
Once the requirements have been met and payment is complete, ECG will arrange the connection and meter installation according to its procedures.
How Long Does It Take to Get an ECG Meter?
The processing time depends on the application and the work required.
ECG's published guidance gives a target of three working days after full payment when the supply line already exists. Where an extension of up to two poles is required, the stated period is five working days. Connections requiring more extensive work may take longer.
Contact your local ECG office to confirm the expected timeline for your property.
Where Can You Apply for an ECG Meter?
You can visit your local ECG office or consult the company's official website for the latest application requirements and connection procedures.
- ECG website: www.ecg.com.gh
- New electricity connection procedure: ECG electricity connection guide
- Energy Commission inspection charges: Inspection and testing fees
Final Thoughts
Getting an ECG meter in Ghana requires the right documents, completed electrical wiring and the necessary inspection and approval.
Before spending money, confirm the current fees with ECG and request an official quotation for your property. Make payments only through authorised cashless channels and keep proof of every transaction.
Preparing everything in advance can help you avoid unnecessary delays and unexpected expenses.
